Back to Table of Contents

Installing and running COSMOS

Using pre-compiled binaries

• At the telescope
  
• Santa Barbara Street
  

Compiling your own binaries

Using pre-compiled binaries

At the telescope

COSMOS is located in /usr/local/magellan/Cosmos2.

Before running any programs, you must execute the following commands:

• source /usr/local/magellan/Cosmos2/magellan-setup
• cp -r $COSMOS_HOME/Cospar $HOME

If you wish to use the IRAF routines display8 and combine8, you must execute the following lines at the cl prompt, or put them in your login.cl file:

• task display8 = "/usr/local/magellan/Cosmos2/bin/display8.cl"

Remember to execute "source /usr/local/magellan/Cosmos2/magellan-setup" in any new windows that you open or put it in your shell startup script.

Santa Barbara Street

The COSMOS software is installed on chiaki, and should be usable from any machine running Linux.

Before running any programs, you must do the following:

• Execute, and copy into your shell startup file (e.g. cshdef or .cshrc) the following commands so that they will be defined in each window you open:

  setenv COSMOS_HOME /data1/chiaki/edwardv/Cosmos/Cosmos2-15
  source $COSMOS_HOME/cosmos2-setup
  setenv COSMOS_PAR_DIR /home/joe-user/whatever/Cospar
  

  If you are running a 64-bit machine you will want to use the following COSMOS_HOME directory instead:

  setenv COSMOS_HOME /data1/chiaki/edwardv/Cosmos/Cosmos2-15_64
  

• Execute the following command to copy the Cospar directory to where you want it, containing the program parameter files:

  cp -r $COSMOS_HOME/Cospar /home/joe-user/whatever
  

• If you have trouble with the Perl libraries, you can also use the ones on chiaki:

  setenv PERLLIB /data1/chiaki/gwalth/Cosmos/perl/lib/perl5/site_perl/5.8.8/i386-linux-thread-multi
  

  If you are running a 64-bit machine you will want to use the following PERLLIB setup instead:

  setenv PERLLIB /data1/chiaki/gwalth/Cosmos/perl_64/lib64/perl5/site_perl/5.8.8/x86_64-linux-thread-multi
  

• If you wish to use the IRAF routine display8, you must execute the following lines at the cl prompt, or put them in your login.cl file:

  task display8 = "/data1/chiaki/edwardv/Cosmos/Cosmos2-15/bin/display8.cl" 
  

The documentation is available locally at www.obs.carnegiescience.edu/Code/cosmos

Compiling your own binaries

Here you can find the latest release at www.obs.carnegiescience.edu/Code/cosmos/source.

COSMOS is known to work with the following:

Architecture	Operating System
x86	Redhat 8, 9; Fedora Core 1, 4, 5; Mac OS X 10.4, 10.5
x86_64	Fedora Core 8; Mac OS X 10.6
PowerPC (G4, G5)	Mac OS X 10.3, 10.4

COSMOS should work on most other Linux systems, and may work on any UNIX variant.

COSMOS at this time does support FFTW3. There is a significant slow down in the way the code is runs with FFTW3. It is recommended to use the most recent version of FFTW2.

Dependencies

Besides the usual stuff, you will need:

• CFITSIO
• PGPLOT and CPGPLOT

If you wish to use the GUI programs setcosdir, defineobs, and viewspectra, you will also need the following Perl modules:

• Astro-FITS-CFITSIO
• ExtUtils-F77
• PDL
• Perl/Tk
• PGPLOT

If you wish to use ldss3-pattern you will need the following library:

• FFTW (v2)

Installation

1. Retrieve the COSMOS tarfile.
2. On your system, create a directory into which the COSMOS system will be installed.
3. define the environment variable COSMOS_HOME to be that directory, e.g.

   setenv COSMOS_HOME "/home/joe_user/my-cosmos2-directory"
   

4. move the tarfile to this directory
5. extract the tarfile: tar -xzvf cosmosYYYY.tar.gz
6. execute cd source
7. You are now ready to build the executable files, but first make sure that the library files (and possibly their associated include files) that are needed are in the expected locations, which are specified in the Makefile. The libraries in question are:
   1. libcpgplot
   2. libcfitsio
   3. libpgplot
   4. libX11
   If they are not, you must do one of the following:
   • copy the files into $COSMOS_HOME/lib
   • create symbolic links to the files in $COSMOS_HOME/lib, (and $COSMOS_HOME/include)
   • edit the Makefile definitions of PGLIB, FITSLIB, and XLIB, (and PGINC, FITSINC, XINC)
   • specify the locations on the make command line, as seen below,

Now, you are ready to execute the make command

make -f Makefile.system [PGLIB=pgplot-dir XLIB=Xll-dir FITSLIB=fits-dir 
    PGINC=pgplot.h-dir XINC=X11.h-dir FITSINC=fits.h-dir]

where system is either "Mac" or "linux", and the options in brackets are only needed if the above mentioned library and header files are not in their expected locations. With a little luck, you will get no error messages, and at the end you will have a completely installed system. If you encounter any errors, they are most likely due to a failure to find all the library and header files, in which case you should check their locations. If you're still having trouble, please refer to the FAQ page.

To compile ldss3-pattern:

1. Make sure that the library files and their associated include files are in the expected locations, which are specified in the Makefile. The libraries in question are:
   1. libfftw
   2. librfftw
   If they are not, you must do one of the following:
   • copy the files into $COSMOS_HOME/lib
   • create symbolic links to the files in $COSMOS_HOME/lib, (and $COSMOS_HOME/include)
   • edit the Makefile definitions of FITSLIB, and FFTWLIB, (and FITSINC, FFTWINC)
   • specify the locations on the make command line, as seen below,

Now you are ready to execute the make command for ldss3-pattern

make -f Makefile-ldss3.system [FITSLIB=fits-dir FFTWLIB=fftw-dir 
    FITSINC=fits.h-dir FFTWINC=fftw.h-dir]

Some final tidying:

1. To set up your Cosmos environment, execute the following commands*:

   setenv COSMOS_HOME "/home/joe-user/my-cosmos2-directory"
   source $COSMOS_HOME/cosmos2-setup
   setenv COSMOS_PAR_DIR "/home/joe-user/my-Cospar-directory"
   

   where my-cosmos2-directory and my-cospar-directory are the locations you have chosen for the cosmos2 software and the Cospar files.

2. Move the Cospar directory to the location you have chosen, as described above.
3. Set the PERLLIB environmental variable to the location of your Perl modules by executing the following*:

setenv PERLLIB "/home/joe_user/my-perl-modules-directory"

If you are using Cosmos on a Mac, you may have Fink installed. If so, you may find a PERL5LIB environmental variable set, in which case you want to append PERLLIB to it by executing the following*:

setenv PERL5LIB "${PERLLIB}:${PERL5LIB}"

4. If you are using Cosmos on 64-bit Mac OS X 10.6 (Snow Leopard), then you will also need to change the value of the environmental variable VERSIONER_PERL_PREFER_32_BIT by executing the following*:

   setenv VERSIONER_PERL_PREFER_32_BIT no

5. If you wish to use the IRAF routine display8, you must execute the following lines at the cl prompt, or put them in your login.cl file. Note that you must specify the full path to the cosmos directory, since IRAF forgets your environment variables, such as COSMOS_HOME

   task display8 = "/home/joe_user/my-cosmos-directory/bin/display8.cl"
   

*You can copy each of these commands into your shell startup file (e.g. cshdef, .cshrc) so that they will be defined in each window you open. You can also place each of these in your shell startup file first and then source that file on the command line. For example:

source ~/.cshrc

The HTML documentation will be available on your own computer at $COSMOS_HOME/docs/COSMOS.html.

Need some help?

If you have trouble with installing or running COSMOS, please

1. Make sure that you have the latest version
2. Make sure that you have carefully read all of the documentation
3. If things still don't work, you can contact cosmos[at]obs.carnegiescience.edu for assistance.

Next: COSMOS Cookbook

Back to Table of Contents